CNC Equipment Supplier

Original Marposs VOP40/VOP40P CNC Machine Tool Wireless Probe 3D Measurement Automatic Edge Finder Infrared Probe

$23,270.00 AUD

~~$37,232.00 AUD~~ $23,270.00 AUD

Sale Sold out

Shipping calculated at checkout.

Color VOP40 VOP40P

Quantity

SPECIFICATIONS

Brand Name: NoEnName_Null

Origin: Mainland China

Original Marposs probe VOP40P

VOP40P is a new Marposs contact optical probe with excellent repeatability of 0.25 m using multi-channel optical transmission mode, remote control frequency switching, and one-key switching. It is suitable for on-machine detection of 2D and 3D curved surfaces of molds on CNC milling machines; batch processing of parts in lathes, grinders, large-size and multi-spindle parts machining factories; workpiece alignment, workpiece detection, Automatic compensation. It is suitable for precision processing industries such as aerospace, biomedicine, and molds.

Applications:

Multi-channel system: each system can install 4 probes.

Multi-spindle application: Two systems can be installed on the same machine tool, and two probes can work at the same time.

The dual probe system makes it possible to use one receiver for workpiece and tool inspection.

UNIDIRECTIONAL REPEATABILITY (2σ) using standard 35 mm finger at 600 mm/min		0,25 μm
2D LOBING in X/Y*		±0,25 μm
3D LOBING in X/Y*		±1 μm
MEASUREMENT FORCE*		XY plane 0,07 N	Z direct. 0,07 N
OVERTRAVEL*		XY plane 12°	Z direct. 6 mm
TRANSMISSION TYPE		Multi-channel optical transmission
TRANSMISSION ACTIVATION/ DEACTIVATION DISTANCE		6 m (HP) 3,5 m (LP)
TRANSMISSION ANGLE		360° on the probe axis 110° on a perpendicular axis
NUMBER OF TRANSMISSION CHANNELS		6max.
TRANSMISSION ACTIVATION		Automatic Machine M code
TRANSMISSION DEACTIVATION		Programmable timer Machine M code
BATTERY TYPE		2 x ½ AA lithium thionyl
BATTERY LIFE**	Stand-by	160 d (HP) 330 d (LP)
	5% usage	200 d (HP) 270 d (LP)
	Continuous usage	800 h (HP) 1300 h (LP)
PROTECTION DEGREE (Standard IEC 60529)		IP68
OPERATING TEMPERATURE		0÷60 °C
(HP) =High Power mode (LP)=Low Power mode ()=Using standard 35 mm stylus (*)=Typical performances which may vary on programming modes basis

VOI receiver with integrated interface

The VOI integrated interface receiver is supplied with a magnetic base for ease of installation and greater control over
positioning within the machine.

VOI must be installed inside the machine tool working area and within the field of vision of the VOP during the measurement
process. There are also four holes so that it can be secured permanently in position using M4 screws.

VOI is available in two versions with axial or radial connector, and is used to set-up the system operation. You can set the
system up by using the optical buttons, or by remote control.

The set-up and troubleshooting procedures are very simple due to the practical 4 digit display and remote control unit.

POWER SUPPLY		13.5 - 30 Vdc max current 100 mA Power consumption 2 W
INPUT SIGNALS (SINK or SOURCE)	Start/Stop SEL O / SEL 1	Opto-isolated 13.5 - 30 Vdc 1 mA at 15 V
OUTPUT SIGNALS (may be set to N.C. or N.O. with the exception of the error, which is always set to N.C.)	Probe1 State/Pulse Probe 2 State/Pulse Battery discharged Error	Solid state relay (SSR) 4 - 30 V 40 mA
PROTECTION DEGREE (IEC 60529)	IP68

View full details